I need a little help configuring an ASA 5505 to work with a Dynamically assigned IP address. I have a comcast modem that received a Dynamic IP address from Comcast. Currently we have a DD-WRT Router acting as a "firewall" and it's WAN IP address is 10.1.10.2 (which is on the Comcast's subnet) while our trusted IP address for the router is 10.0.0.1.
I am just trying to get the ASA to pass internet traffic while using a Dynamic IP address and I only want ports 80, 8080, 443, and 3389 to be allowed from untrust to trust.
Hello "BID 100$ and lower for this project" Need to set up asterisk on server and do the below duty: 1- Introduce a suitable server provider for this project so I could take the server from there ( to handle 30 simultaneous calls). 2- Install asterisk on the server...
We need to install our Cisco PBX to one more complex with some of the following requirements: - Support 100 and can be extended to more users - Support SPA 514, SPA 525 telephones - If possible no limitations in Auto Attendant Menus - Support VPN connection to other IVRs - Support Recording - Call